Outdoor Wireless Bridge, Point to Point WiFi Bridge with 2 Ethernet Port, 5.8GHz 1-3KM Distance, 100Mbps, 24V PoE Adapter, 2 Pack
The communication frequency band is between 5.8 GHz, the transmission distance is 1-3 km, Support 12V DC and POE power supply, LED & Web Managed, One-key bridge, IP65 Waterproof design
- Product Code: CPE450
- Availability: In Stock
CPE450 is a long range high performance 802.11ac outdoor CPE with 450Mbps data rate. Comply with IEEE 802.11b/g/n/ac standard, 14dBi dual polarized high gain antenna, the PTP/PTMP distance is more than 3000 meters.
It support Wireless AP, Wireless Bridge operation mode for PTP/PTMP connections, with operation switch on device, easy to setup CPE450’s operation mode, no need to access into GUI, avoid the complex setup program, then simple to view the signal strength by LED signal lights, save much human work and cost, make the long range wireless coverage, data transmit and wireless monitoring simple and professional.
CPE450 with ABS waterproof, dustproof and sunscreen shell, temperature adaptive also; Meantime, it support 24V PoE and DC input, ESD protection and surge protection, ideal for outdoor use.
Fast Pairing Method
One to one pairing method
1. Dial a bridge to "M" and another bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired successfully.
One to multiple pairing method
1. Dial a bridge to "M" and the other bridge to "S".
2. Short press "Dig SW/ Reset" button, each digital tube value will add one (0-9-A-F cycle).
3. The paired bridge is set to the same value and can be paired successfully.
5.8GHz Frequency and 3KM PTP/PTMP Distance
CPE450 with full frequency of 5020~6100MHz, more than 200 channels available, it avoid the frequency interference problem, the PTP/PTMP distance is more than 3000 meters, full meet with data transmission in fast speed, low delay, high stability requirement in wireless security or data transmission.
LED Display and Button Press to Bridge
With visible LED display to show channels, then with M/ S button, press it to the same value for quickly point to point and point to multi-point wireless connection, simple to install and degu, cost saving.
One to multiple Point Connection
One to multiple point connection allows users to connect multiple wireless bridge together. As such, two or more locations are able to use multi bridge in order to share a single internet connection, which can allow them to share data across that shared network.
Web Management
You can easily use the web interface to set up the network, wifi, to meet your personalized needs. The default IP is 169.254.254, the password is 88888888
IP65 Outdoor Water-Proof
CPE450 with ABS waterproof, dust proof and sunscreen shell, avoid the damage from dust, thunderstorm weather. Meantime, it adaptive to various environment, the working temperature can be normal at -40℃ to 55℃. Suit for any country.
PoE Powered
CPE450 has integrated passive 24V PoE, for easy installation and lower cost. It can be installed in areas where power outlets are not readily available, eliminating the mess of altering existing network infrastructure.
Ask Question About Product
Wireless Hardware Specifications | |
Model | CPE450 |
Name | 5.8G 450Mbps Outdoor CPE with LED Display |
Wireless Standards | 802.11a/n/ac |
Operating Bands | 5.150GHz – 5.850GHz |
Antenna | Built-in 14 dBi directional antenna |
Signal Rate | 450Mbps |
Maximum Transmit Power | ≤ 19dBm |
End Users | 50+ |
Chipset | MTK7628KN (560MHz DDR:N/A Ref:40MHz) |
Flash | 2MB |
DDR | 8MB |
Interface | 2*10/100 Mbps RJ45 Ports |
LED Light | 1* Digital switch / reset button, Short press - each digital tube value will add one (0-9-A-F cycle |
Power Supply | 24V Passive POE adapter |
Installation | Pole/Wall Mounting |
Power Consumption | ≤ 8W |
External Buttons | reset button, Short press - each digital tube value will add one (0-9-A-F cycle |
Structure Size | 279 x 265 x 89 mm / 1.21kg |
Environment | Operating Temperature: -30~55 ℃ Limit working temperature: -40~70 ℃ Storage Temperature: -40~70 ℃ Humidity: 5%~95% non-condensing |
Wireless Software Features | |
Operation Mode | AP Mode + Repeater Mode |
Wireless Function | Support SSID hiding, Enable/Disable Wireless Radio |
Wireless Security | Captive Portal Authentication Static backlist and whitelist Wireless Isolation Between Clients SSID to VLAN Mapping SUpport 802.1X WPA/WPA2/PSk/WPA/WPA2-Enterprise |
Management | Support Local Management with Web |
Name | Size | Date Added |